Distance Sensing Cruise Control Module Scan Tool Information
Cruise Control Vehicle Distance Sensor Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Engine Running/Cruise Control ON | |||
| Automatic Alignment Learn Progress | - | Varies | The scan tool displays a percent complete value. This is the current status of the alignment progress. |
| Automatic Alignment Learn Status | - | Learn Successful | The scan tool displays Off, Ready, Learn Failed. Learn Successful or Busy. This is the learn state of the automatic alignment. |
| Brake Pedal Position Sensor | - | Varies | The scan tool displays Released or Applied depending on the state of the brake pedal |
| Cruise Control Disengage History 1-4 | - | Varies | This is the state of the ACC disable history. |
| Cruise Control Driver Memory | - | - | Driver 1 or Driver 2 |
| Cruise Control Inhibit Data | - | - | This is the cruise control inhibit reason. |
| Cruise Control On/Off Switch Status | - | On | The scan tool displays On or Off. This is the state of the cruise on/off switch. |
| Cruise Control Throttle Override By Driver | - | Varies | The scan tool displays Active or Inactive. This is the state of the throttle override. |
| Cruise Control Throttle Override By Driver Indicator Message | - | - | Active/Inactive |
| Distance Sensing Cruise Control Status | - | - | Active/Inactive |
| Distance Sensing Cruise Control Type | - | - | Full Speed Range or Limited Speed Range |
| Following Distance Setting | - | Varies | The scan tool displays Stage 1, Stage 2 or Stage 3. This is the selected following distance. |
| Horizontal Alignment Angle | - | - | The scan tool displays a percentage value. |
| Ignition Voltage Signal | - | 11-14 V | The scan tool displays a voltage value. This is the current ignition voltage signal. |
| Radar Needs Cleaning | - | No | The scan tool displays Yes or No. |
| Radar Temporarily Unavailable Indicator Message | - | - | Active/Inactive |
| Service Radar Display Message | - | Inactive | The scan tool displays Active or Inactive. Active will be displayed when the cruise control vehicle distance sensor module detects a malfunction in the ACC system. |
| System Voltage | - | 11-14 V | The scan tool displays a voltage value. This is the current battery voltage. |
| Vertical Alignment Angle | - | - | The scan tool displays a percentage |
Cruise Control Vehicle Distance Sensor Module Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Distance Sensing Cruise Control Service Alignment | The cruise control vehicle distance sensor module will activate the alignment/calibration procedure when selected. |