Pedestrian Alert Sound Control Module Scan Tool Information
Scan Tool Data Parameters
| Parameter | Expected Value | Description |
|---|---|---|
| Operating Conditions: Ignition On. | ||
| System Power Mode | On | The scan tool displays the present state of the System Power Mode. This can be Off, On, or Service Mode. |
| High Speed CAN Bus Communication Enable Status | Enabled | The scan tool will display either Enabled or Disabled. |
| Pedestrian Alert Sound System | Active | The scan tool will display Disabled, Active, or Malfunction. |
| Pedestrian Alert Sound | Active | The scant tool will display Active or Inactive. |
| Pedestrian Alert Sound When Driving Forward | Sound 1 | The scan tool will display None, Sound 1, Sound 2, or Sound 3. |
| Pedestrian Alert Sound When Driving Backwards | Sound 1 | The scan tool will display None, Sound 1, Sound 2, or Sound 3. |
| Service Pedestrian Alert Sound System Message | Inactive | The scan tool will display Active or Inactive. |
Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Pedestrian Alert Sound System | Then scan tool can Enable or Disable the System. |
| Pedestrian Alert Sound When Driving Forward | The scan tool can turn On or Off the Sound that is played when driving forward. |
| Pedestrian Alert Sound When Driving Backwards | The scan tool can turn On or Off the Sound that is played when driving backwards. |
| Pedestrian Alert Sound System Message | The scan tool can turn On or Off the Service Pedestrian Friendly Alert Indicator. |