Suspension Control Module Scan Tool Information
The electronic suspension control module scan tool data parameters list contains all suspension control related parameters that are available on the scan tool. The list is arranged in alphabetical order. A given parameter may appear in any one of the data lists.
Suspension Control Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Battery Voltage | - | 11-14 V | The scan tool displays V. This is the current battery voltage. |
| Front Steering Position Sensor Circuit | Steering wheel in straight position | -5 to +5° | The scan tool displays °. This is the current position of the steering angle sensor. |
| Steering wheel turned left until stop | 450-550° | ||
| Steering wheel turned right until stop | -550 to -450° | ||
| Left Front Shock Absorber Actuator Command | - | varies | The scan tool displays mA. This is the current applied to the left front shock absorber actuator. |
| Left Front Vertical Body Acceleration | - | 0 m/s2 | The scan tool displays m/s2 . This is the signal from the left front body acceleration sensor. |
| Left Front Vertical Wheel Acceleration | - | 0 m/s2 | The scan tool displays m/s2 . This is the signal from the left front wheel acceleration sensor. |
| Left Rear Shock Absorber Actuator Command | - | varies | The scan tool displays mA. This is the current applied to the left rear shock absorber actuator. |
| Rear Vertical Body Acceleration | - | 0 m/s2 | The scan tool displays m/s2 . This is the signal from the rear body acceleration sensor. |
| Right Front Shock Absorber Actuator Command | - | varies | The scan tool displays mA. This is the current applied to the right front shock absorber actuator. |
| Right Front Vertical Body Acceleration | - | 0 m/s2 | The scan tool displays m/s2 . This is the signal from the right front body acceleration sensor. |
| Right Front Vertical Wheel Acceleration | - | 0 m/s2 | The scan tool displays m/s2 . This is the signal from the right front wheel acceleration sensor. |
| Right Rear Shock Absorber Actuator Command | - | varies | The scan tool displays mA. This is the current applied to the right rear shock absorber actuator. |
| Suspension Position Sensor 5 V Reference | - | 4.8-5.2 V | The scan tool displays V. This is the wheel and body acceleration sensors supply voltage. |
| Suspension System Mode | Normal Mode | Normal Mode | The scan tool displays Normal, Sport, or Mountain Mode, depending on the selected mode. |
| Sport Mode | Sport Mode | ||
| Mountain Mode | Mountain Mode | ||
| Vehicle Speed | - | 0 km/h (0 MPH) | The scan tool displays km/h (MPH) depending on the current speed of the vehicle. |
Suspension Control Module Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Left Front Shock Absorber Actuator | Commands the current applied to the left front shock absorber actuator Increase or Decrease. |
| Left Rear Shock Absorber Actuator | Commands the current applied to the left rear shock absorber actuator Increase or Decrease. |
| Right Front Shock Absorber Actuator | Commands the current applied to the right front shock absorber actuator Increase or Decrease. |
| Right Rear Shock Absorber Actuator | Commands the current applied to the right rear shock absorber actuator Increase or Decrease. |
| Suspension System Mode | Commands the electronic suspension system Comfort, Sport Mode, Normal. |