Unsuccessful Programming Recovery

In the event of an interrupted or unsuccessful programming event, perform the following steps:

1. DO NOT turn the vehicle OFF. Ensure that all ECU, DLC and programming tool connections are secure and the TIS terminal operating software is up to date.
2. Attempt to reprogram the ECU.
   NOTE: If the T6 Drive Motor Power Inverter Module is programmed with the hood open, the vehicle will not start until the hood is closed. Normal operation will return after the hood has been closed.
3. If the ECU can still not be programmed, turn the vehicle OFF for at least 1 minute.
4. Turn the vehicle ON and attempt to reprogram the ECU. The ECU should program.
   • If the ECU still cannot be programmed, replace the ECU.