Circuit/System Verification
- Verify DTC P1824, P182A-P182F, P1838-P1841, P18B5-P18BA, P18BC, P18BF, P18C0, P18C2 or P18C3 is not set.
- If any of the DTCs are set
Refer to DTC P1824, P182A-P182F, P1838 or P1839 .
- If none of the DTCs are set
- If any of the DTCs are set
- Verify that DTC P16F4 is not set.
- If the DTC is set
- Program the T6 Power Inverter Module.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets, replace the T6 Power Inverter Module.
- If the DTC does not set
- All OK
- If the DTC is not set
- All OK