Installation Procedure

Drive Motor Battery Charger (3)» Install

Fig 1: Drive Motor Battery Charger And Fasteners
Courtesy of GENERAL MOTORS COMPANY
Drive Motor Battery Charger Fastener (2)» Install and tighten [2x] 22 N.m (16 lb ft)
CAUTION: Refer to Fastener Caution
Drive Motor Battery Charger Fastener (1)» Install and tighten [2x] 22 N.m (16 lb ft)
Electrical Connector (1)» Connect [3x]

Fig 2: Generator Control Module Inlet And Outlet Hoses With Electrical Connectors
Courtesy of GENERAL MOTORS COMPANY
Install the generator control module coolant inlet and outlet hoses (2), refer to Generator Control Module Coolant Outlet Hose Replacement (Inlet) and/or Generator Control Module Coolant Outlet Hose Replacement (Outlet)
Lower the vehicle.
Enable the high voltage system. Refer to High Voltage Enabling