Accessory AC and DC Power Control Module Replacement

Fig 1: Accessory AC and DC Power Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection Rear Compartment Floor Stowage Compartment Cover Replacement (Without HP9)
1	Accessory AC and DC Power Control Module Nut [3x] CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Accessory AC and DC Power Control Module Procedure Disconnect the electrical connectors. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection Control Module References for programming and set-up information, if required.

Callout

Component Name

Preliminary Procedures

Accessory AC and DC Power Control Module Nut [3x]

CAUTION: Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Accessory AC and DC Power Control Module

Procedure

Disconnect the electrical connectors.
Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
Control Module References for programming and set-up information, if required.