Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal.
|
|---|
| Application |
| Catalytic Converter Gasket |
| Catalytic Converter Seal |
| Exhaust Manifold Gasket |
| Exhaust Muffler Gasket |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal.
|
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Exhaust Manifold Fasteners (LTG) | |
|
20 N.m (15 lb ft) |
|
20 N.m (15 lb ft) |
|
20 N.m (15 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal.
|
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Brace Bracket Bolt (LGW, LTG) | 22 N.m (16 lb ft) |
| Catalytic Converter Brace Bracket Nut (LGW, LGX) | 22 N.m (16 lb ft) |
| Catalytic Converter to Cylinder Head Nut (LGW, LGX) | 50 N.m (37 lb ft) |
| Catalytic Converter to Turbocharger Nut (LTG) | 50 N.m (37 lb ft) |
| Exhaust Manifold Brace Fastener (LTG) | 25 N.m (18 lb ft) |
| Exhaust Manifold Heat Shield Bolt (LTG) | 10 N.m (89 lb in) |
| Exhaust Muffler to Catalytic Converter Nut (LGW, LGX, LTG) | 50 N.m (37 lb ft) |
| Exhaust Pipe Clamp Nut (LGW, LGX) | 50 N.m (37 lb ft) |
| Exhaust Rear Muffler Rear Hanger Bolt | 22 N.m (16 lb ft) |
| Floor Panel Number 2 Cross Bar Reinforcement Bolt (LGW, LGX, LTG) | 22 N.m (16 lb ft) |
| Floor Panel Number 4 Bar Fastener (LGW, LGX, LTG) | 22 N.m (16 lb ft) |
| Front Body Exhaust Heat Shield Bolt | 9 N.m (80 lb in) |
| Front Body Exhaust Heat Shield Retainers | 1.75 N.m (15 lb in) |
| Intermediate Body Exhaust Heat Shield Fasteners | 1.75 N.m (15 lb in) |
| Turbocharger Heat Shield Bolt (LGW) | 10 N.m (89 lb in) |