Rear Toe Adjustment (Without NYS)

Measure the alignment angles and record the readings. Refer to Wheel Alignment Measurement .
Rear Suspension Adjust Link Nut (1)» Loosen

Fig 1: Rear Suspension Adjust Link Nut
Courtesy of GENERAL MOTORS COMPANY
Rotate the rear suspension adjust link inner bolt (1) until the proper toe measurement is achieved. Refer to Wheel Alignment Specifications .

Fig 2: Rear Suspension Adjust Link Inner Bolt
Courtesy of GENERAL MOTORS COMPANY
Hold the rear suspension adjust link inner bolt and tighten the rear suspension adjust link nut (1). Refer to Adjust Link Replacement (Without NYS)

Fig 3: Rear Suspension Adjust Link Nut
Courtesy of GENERAL MOTORS COMPANY

NOTE: Tighten the rear suspension adjust link nut enough to maintain the adjustment. Verify the rear toe reading prior to tightening the bolt to its final torque.

CAUTION: Refer to Fastener Caution .
Check the alignment specification and readjust if necessary. Refer to Wheel Alignment Specifications