Remote Control Door Lock Receiver Replacement

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Remote Control Door Lock Receiver

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear window trim panel. Refer to Rear Window Panel Trim Replacement (With DB3) and/or Rear Window Panel Trim Replacement (Without DB3) .
1	Remote Control Door Lock Receiver Procedure Disconnect the electrical connector and the remote control door lock receiver antenna. Slide the receiver rearward to release. For programming and set up, refer to Control Module References .

Callout

Component Name

Preliminary Procedure
Remove the rear window trim panel. Refer to Rear Window Panel Trim Replacement (With DB3) and/or Rear Window Panel Trim Replacement (Without DB3) .

Remote Control Door Lock Receiver

Procedure

Disconnect the electrical connector and the remote control door lock receiver antenna.
Slide the receiver rearward to release.
For programming and set up, refer to Control Module References .