Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Steering Gear Boot Inner Clamp |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Steering Gear Bolt | |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Steering Gear Nut (AWD) | |
|
70 N.m (52 lb ft) |
|
90-100 degrees |
| Steering Gear Nut (RWD) | |
|
58 N.m (43 lb ft) |
|
90-105 degrees |
| Steering Linkage Inner Tie Rod | 105 N.m (77 lb ft) |
| Steering Linkage Outer Tie Rod | |
|
35 N.m (26 lb ft) |
|
90-100 degrees |