Circuit/System Verification
- Ignition ON/Vehicle in Service Mode.
- Verify that DTC P174D or P17AB is not set.
- If DTC P174D is set
Perform the programming and learn procedure for the K173 Transmission Range Control Module.
- Verify DTC P174D is not set.
- If DTC P174D is set
Replace the K173 Transmission Range Control Module.
- If DTC P174D is not set
All OK.
- If DTC P174D is set
- If DTC P17AB is set
Perform the programming procedure for the K173 Transmission Range Control Module.
- Verify DTC P17AB is not set.
- If DTC P17AB is set
Replace the K173 Transmission Range Control Module.
- If DTC P17AB is not set
All OK.
- If DTC P17AB is set
- If none of the DTCs are set
- If DTC P174D is set
- All OK