Video Processing Module Replacement

Fig 1: Video Processing Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove Rear Window Panel Trim. Refer to Rear Window Panel Trim Replacement (Without DB3)Rear Window Panel Trim Replacement (With DB3)
1	Video Processing Module Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Video Processing Module Procedure Disconnect the electrical connector. Refer to Control Module References for programming and setup information, if required.

Callout

Component Name

Video Processing Module Nut (Qty: 2)

CAUTION:

Tighten
9 N.m (80 lb in)

Video Processing Module

Procedure

Disconnect the electrical connector.
Refer to Control Module References for programming and setup information, if required.