Removal & Installation
WARNING: This page is about the CT6 Base, 2.0L Eng VIN X, which is a different variant/trim than selected.
Includes: Bleed Brake System.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| In-Line4,Gas | Includes: Confirm Fluid temperature for level check. | 8.2 | C | |
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| In-Line4,Gas | 0.2 | C | ||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| In-Line4,Gas, Crankshaft Rear Oil Seal | 0.4 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| In-Line4,Gas | 0.2 | C | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| In-Line4,Gas | 0.1 | C | ||
| Combination Procedure: TORQUE CONVERTER SEAL: Remove & Replace: | ||||
| In-Line4,Gas | 0.3 | B | ||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| In-Line4,Gas | 0.8 | C | ||