LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2018 >> CT6 Plug-In >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Programming And Setup - All Systems >> Repair Instructions >> K60 Steering Column Lock Module: Programming and Setup >> Reprogram Steering Column Lock Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reprogram Steering Column Lock Control Module

NOTE:

before reprogramming, to ensure that the steering column lock password from the BCM is learned: turn ignition ON and then OFF, close all doors, and wait 5 minutes.

To reprogram an existing steering column lock control module, perform the following procedure:

  1. Ignition ON For 10 seconds, ignition OFF.
  2. Close all doors and wait 5 minutes.
  3. Install EL-49642  SPS programming Support tool.
  4. Ignition ON.
  5. Access the Service Programming System (SPS) and follow the on-screen instructions.
  6. On the SPS Supported Controllers screen, select K60 Steering Column Lock Control Module - Programming and follow the on-screen instructions.
  7. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
scientia non olet · About LEMON Manuals