Unsuccessful USB File Transfer Event Recovery
- Move the vehicle outside (no roof obstructions and a clear line of site to the sky)
- Verify a valid internet connection (Wi-Fi or Ethernet) is available
- Verify the Digital Map Control Module Clock Status and GPS Accuracy scan tool information is VALID. If the displayed value is not VALID, drive the vehicle with a clear view of the sky for 5 minutes (no building obstructions and a clear line of site to the sky).
- Access the Service Programming System (SPS) and follow the on-screen instructions.
- On the SPS Supported Controllers screen, select K179 Digital Map Control Module - USB File Transfer and follow the on-screen instructions.
- At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
- Road test the vehicle with a clear view of the sky for 5 minutes (no building obstructions and a clear line of site to the sky).
- Verify no DTCs have set.