Video Processing Control Module Calibration: Notes
Image will be slightly distorted at all times, the camera(s) lens is a fish-eye lens meant to capture as much as possible.
The calibration procedure is to have the Video Processing Control Module learn the new cameras and their positions. The calibration does not start automatically or if manual initialization is desired, calibration can be initiated by selecting Video Processing Control Module Camera Learn in the scantool.
Radio Display Prompt Example
Only ONE EL-51372 Camera Calibration Mat is required for calibration.
The left side of the screen will display where the EL-51372 Camera Calibration Mat should be located for each step. The right side of the display is the view from the camera that is being learned during that step.
Mat Position Reference
- Position A is the left front
- Position B is the right front
- Position C is the left rear
- Position D is the right rear