Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Electronic Brake Control Module (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Electronic Brake Control Module Bolt (1) - Install and tighten 3 N.m (27 lb in) [4x]
Courtesy of GENERAL MOTORS COMPANY

Brake Pressure Modulator Valve Primary Brake Pipe Fitting (1) - Install and tighten 32 N.m (24 lb ft)
Connect the EBCM electrical connector.
Bleed the brake system. Antilock Brake System Automated Bleed
Courtesy of GENERAL MOTORS COMPANY

Front Wheelhouse Liner (2) - Install - Front Wheelhouse Liner Replacement
Engine Wiring Harness Fuse Block Bracket - Install - Engine Wiring Harness Fuse Block Bracket Replacement
Program the EBCM. Control Module References
Center the steering angle sensor. Steering Wheel Angle Sensor Centering (without UKL)Steering Wheel Angle Sensor Centering (with UKL)