LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2018 >> CT6 Plug-In >> Repair and Diagnosis (Single Page) >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> K36 Inflatable Restraint Sensing and Diagnostic Module: Programming and Setup >> Programming an Existing or New Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming an Existing or New Control Module

To program an existing or new control module, perform the following procedure:

  1. Ignition - On / Vehicle - In Service Mode
  2. Access SPS and follow the on-screen instructions For the control module: K36 Inflatable Restraint Sensing and Diagnostic Module
  3. perform the SPS function: Programming and Setup
scientia non olet · About LEMON Manuals