Circuit/System Verification
- Ignition - On/Vehicle - In Service Mode
- Operate the component: Rear Defogger Switch - Pressed
Verify the component turns On and Off: E18 Rear Defogger Grid
- If the component does not turn On and Off
Refer to: Circuit/System Testing
- Go to next step: If the component turns On and Off
- If the component does not turn On and Off
- Perform the scan tool control function: Illuminate All Indicators - On and Off
Verify the component turns On and Off: Rear Defogger Indicator
- If the component does not turn On and Off
Replace the component: A26 HVAC Controls
- Go to next step: If the component turns On and Off
- If the component does not turn On and Off
- All OK.