Circuit/System Verification

Vehicle ON.
Verify DTC P0562 or P0563 is not set.
- If any of the DTCs are set
  Refer to DTC B1325, B1330, B1517, C0800, C0899, C0900, C12E1, C12E2, P0561-P0563, P1A0C, P1A0D, or P1EFC .
- Go to next step: If none of the DTCs are set
Verify DTC P1E4B is not set.
- If the DTC is set
1. Verify the T6 Power Inverter Module has the latest calibration in Calibration Information.
  - If the T6 Power Inverter Module does not have the latest calibration, program the T6 power inverter module.
  - If the T6 Power Inverter Module has the latest calibration, replace the T6 Power Inverter Module.
2. Verify the DTC does not set.
  - If the DTC sets, replace the T6 Power Inverter Module.
  - Go to next step: If the DTC does not set
3. All OK.
- Go to next step: If the DTC is not set
All OK.