Rear Toe Adjustment (Without NYS)
- Measure the alignment angles and record the readings. Wheel Alignment Measurement .
Rear Suspension Adjust Link Nut (1) - Loosen
Rotate the rear suspension adjust link inner bolt (1) until the proper toe measurement is achieved. Wheel Alignment Specifications .
- NOTE:
Tighten the rear suspension adjust link nut enough to maintain the adjustment. Verify the rear toe reading prior to tightening the bolt to its final torque.
CAUTION:Refer to Fastener Caution .
Hold the rear suspension adjust link inner bolt and tighten the rear suspension adjust link nut (1). Adjust Link Replacement (Without NYS)
- Check the alignment specification and readjust if necessary. Wheel Alignment Specifications