Removal & Installation
WARNING: This page is about the Escalade Base, 4WD, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 4WD, w/o Skid Plate | Includes: R&I Transfer Case Assembly. Includes: Confirm Fluid temperature for level check. | 7.4 | C | |
| 4WD, w/Skid Plate | Includes: R&I Transfer Case Assembly. Includes: Confirm Fluid temperature for level check. | 7.6 | C | |
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Rear | 0.6 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Overhaul: | ||||
| 4WD | 4.0 | A | ||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Replace: | ||||
| 4WD | 0.3 | C | ||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 10 Spd Trans | Includes: Programming. | 0.8 | C | |