Removal & Installation
WARNING: This page is about the XT6 Premium Luxury, 4WD, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 4WD | Includes: Confirm Fluid temperature for level check. Includes: R&I Suspension Crossmember Assembly. DOES NOT include wheel alignment. | 11.4 | C | |
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Rear,Housing and Seal,w/Engine Oil Cooler | Includes: R&I Upper Oil Pan. | 1.4 | B | |
| Rear,Housing and Seal,w/o Engine Oil Cooler | Includes: R&I Upper Oil Pan. | 0.8 | B | |
| Rear,Seal | 0.4 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: OUTPUT SHAFT SEAL: Remove & Replace: | ||||
| Each | 0.2 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TORQUE CONVERTER SEAL: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| Includes: Programming. | 0.8 | C | ||
| Combination Procedure: TRANSMISSION OIL COOLER & LINES: Flush: Includes: Inspect for leaks and fluid flow test. | ||||
| 0.5 | C | |||