LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1976 >> Chevette Base, Standard Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Cruise Control >> Testing >> Engagement Switch Wiring Harness
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engagement Switch Wiring Harness

  1. Disconnect switch harness three wire connector at lower part of steering column. Disconnect battery ground cable. Connect ohmmeter between brown/white wire (dk. blue wire on Cadillac) in main wire harness and ground. Make sure regulator is well grounded. Ohmmeter should read 42-49 ohms.
  2. If resistance is above or below specified value, disconnect harness connector at transducer and measure resistance of brown/white (white on Cadillac) resistor wire. Resistance should measure 40±2 ohms. If resistance not as specified, replace wire harness.
scientia non olet · About LEMON Manuals