Removal & Installation
WARNING: This page is about the Chevette Base, 2D Hatchback, 1.6L Eng VIN 9, Automatic Trans, Trans Mfr CD 180/MD3, which is a different variant/trim than selected.
TRANS ID - 180, 180C
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 3.2 | 2.4 | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | 0.2 | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | 0.2 | C |
| Combination Procedure: FRONT PUMP (REMOVED): Overhaul: |
| | 0.6 | 0.6 | B |
| Combination Procedure: FRONT PUMP BUSHING & SEAL: Remove & Replace: |
| | 0.3 | | B |
| Combination Procedure: OIL PUMP: Remove & Replace: |
| Front | | 0.9 | 0.9 | B |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| Front | | 0.2 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | 0.3 | C |
TRANS ID - 200, 200C, 200-4R
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 3.0 | 2.2 | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | 0.2 | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | 0.2 | C |
| Combination Procedure: FRONT PUMP (REMOVED): Overhaul: |
| | 0.5 | 0.5 | B |
| Combination Procedure: FRONT PUMP BUSHING & SEAL: Remove & Replace: |
| | 0.3 | | B |
| Combination Procedure: OIL PUMP: Remove & Replace: |
| Front | | 0.6 | 0.6 | B |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| Front | | 0.2 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | 0.3 | C |