PROM

CAUTION:
If the computer is found to be defective and needs replacement, remove the old PROM and place it into the replacement computer. Some ECM's are equipped with another chip called a CALPAK. If the computer is equipped with a CALPAK chip, it will be located next to the PROM and must be transferred along with the PROM. When replacing the computer always transfer the BROADCAST CODE and PRODUCTION ECM/PCM NUMBER to the service label on the replacement computer.


DESCRIPTION:
To allow one type of computer to be used for many different vehicles, a device called a Programable Read Only Memory (PROM) unit is used. The PROM is located inside the computer and has system calibration information based upon the vehicle's axle ratio, engine, transmission, weight, and other specific configurations of the vehicle.