Engine Assembly: Remove, Install, and Overhaul

Includes: Replace Rings, Main and Rod Bearings, Camshaft(s), Crankshaft and Timing Components. Remove Cylinder ridge, burnish Cylinders, grind Valves and clean and test or replace Lifters. Includes (where applicable): Adjust Valves. DOES NOT include Pin fit or rebore and align Rods. See machine operations.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
		29.5		A
Additional Procedure: ENGINE ASSEMBLY: Remove, Install, and Overhaul:
Where Air Cond interferes add		0.5		A
Where Air Pump interferes add		0.4		A
Where Cruise Control interferes add		0.2		A
Where Elect Eng System interferes add		0.5		A
Where Pwr Strg Interferes add		0.4		A
Combination Procedure: CAMSHAFT BEARING: Remove & Replace:
Each		0.3		A
Combination Procedure: ROCKER ARM (REMOVED): Reface:
Eight		0.4		B
Sixteen		0.8		B
Combination Procedure: VALVE SPRING ASSEMBLED HEIGHT: Correct:
Per 3 Springs		0.2		A