AIR Management System

This system helps to reduce HC and CO content in exhaust gases and to quickly heat up catalytic converter and oxygen sensor during cold engine operation. This is accomplished by injecting air into exhaust port of each cylinder. The ECM energizes an air control solenoid which allows air to flow to air switching valve, directing air to exhaust ports. During warm engine (closed loop) operation, the ECM de-energizes air switching valve, directing air to dual-bed converter, which lowers HC and CO emissions.

If air control valve detects rapid increase in manifold vacuum (deceleration condition), or ECM detects any failure in CCC system, air is diverted to air cleaner or dumped to atmosphere.