Piston Ring Set: Remove & Replace
WARNING: This page is about the Spectrum Base, 2D Hatchback, Automatic, which is a different variant/trim than selected.
Includes: Remove carbon and Cylinder ridge, burnish Cylinders and replace Rod Bearings. Adjust Valves (where applicable).
DOES NOT include Pin fit and/or align.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Automatic Trans,Normally Aspirated, All Cylinders | 10.5 | A | ||
| Additional Procedure: PISTON RING SET: Remove & Replace: | ||||
| Gas, Where Air Cond interferes add | 0.4 | 0.4 | A | |
| In-Line4, Where Air Cond interferes add | 0.4 | 0.4 | A | |
| Where Cruise Control interferes add | 0.2 | A | ||
| Where Elect Eng System interferes add | 0.5 | A | ||
| Combination Procedure: PISTON OR ROD PIN: Remove & Replace: DOES NOT include Pin fit and/or align. | ||||
| Each | 0.3 | A | ||
| Combination Procedure: ROCKER ARM &/OR SHAFT: Disassemble & Assemble: Includes: Clean and replace necessary components only. | ||||
| Both | 0.6 | B | ||
| One | 0.3 | B | ||
| Combination Procedure: ROCKER ARM STUD: Remove & Replace: | ||||
| Each Additional | 0.2 | B | ||
| One | 0.3 | B | ||
| Combination Procedure: VALVE SPRING ASSEMBLED HEIGHT: Correct: | ||||
| Per 3 Springs | 0.2 | A | ||