Timing Belt: Remove & Replace
WARNING: This page is about the Spectrum Base, 2D Hatchback, Automatic, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Normally Aspirated,Automatic Trans, w/Engine Removal | 7.7 | B | ||
| w/o Engine Removal | 1.5 | B | ||
| Additional Procedure: TIMING BELT: Remove & Replace: | ||||
| Where Air Cond interferes add | 0.4 | B | ||
| Where Cruise Control interferes add | 0.2 | B | ||
| Where Pwr Strg Interferes add | 0.4 | B | ||
| Combination Procedure: CAMSHAFT SEAL: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: CAMSHAFT SPROCKET: Remove & Replace: | ||||
| 0.1 | B | |||
| Combination Procedure: CRANKSHAFT SPROCKET: Remove & Replace: | ||||
| 0.1 | B | |||
| Combination Procedure: INTERMEDIATE SHAFT SPROCKET: Remove & Replace: | ||||
| 0.1 | B | |||
| Combination Procedure: TIMING BELT IDLER PULLEY: Remove & Replace: | ||||
| 0.1 | B | |||
| Combination Procedure: TIMING BELT TENSIONER: Remove & Replace: | ||||
| 0.1 | B | |||