Piston Ring Set: Remove & Replace

Includes: Remove carbon and Cylinder ridge, burnish Cylinders and replace Rod Bearings. Adjust Valves (where applicable). DOES NOT include Pin fit and/or align.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
All Cylinders,w/Air Cond		18.2		A
All Cylinders,w/o Air Cond		17.3		A
Additional Procedure: PISTON RING SET: Remove & Replace:
Where Cruise Control interferes add		0.2		A
Where Elect Eng System interferes add		0.5		A
Where Engine Oil Cooler interferes add		0.4		A
Where Pwr Strg interferes add		0.4		A
Combination Procedure: MAIN BEARINGS: Remove & Replace:
V6,Gas, All		2.5		A
Combination Procedure: PISTON OR ROD PIN: Remove & Replace: DOES NOT include Pin fit and/or align.
Each		0.3		A
Combination Procedure: ROCKER ARM STUD: Remove & Replace:
Each Additional		0.2		B
One		0.3		B
Combination Procedure: VALVE: Grind Complete:
V6,Gas		2.7		A
Combination Procedure: VALVE LIFTERS: Remove & Replace:
V6, All		0.4		B
Combination Procedure: VALVE LIFTERS (REMOVED): Clean:
Each Additional		0.1		B
One		0.2		B