Removal & Installation
WARNING: This page is about the Caprice Base, 4.3 Z, 4L60/MD8, which is a different variant/trim than selected.
TRANS ID - 200, 200C, 200-4R
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| w/o Overdrive | | 3.2 | 2.4 | C |
| w/Overdrive | | 3.5 | 2.6 | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | 0.2 | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | 0.2 | C |
| Combination Procedure: FRONT PUMP (REMOVED): Overhaul: |
| | 0.5 | 0.5 | B |
| Combination Procedure: FRONT PUMP BUSHING & SEAL: Remove & Replace: |
| | 0.3 | | B |
| Combination Procedure: OIL PUMP: Remove & Replace: |
| Front | | 0.6 | 0.6 | B |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| Front | | 0.2 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | 0.3 | C |
TRANS ID - 700-R4, 4L60, 4L60E, 4L65E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 3.0 | 1.7 | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | 0.2 | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | 0.2 | C |
| Combination Procedure: FRONT PUMP (REMOVED): Overhaul: |
| | 0.5 | | B |
| Combination Procedure: FRONT PUMP BUSHING & SEAL: Remove & Replace: |
| | 0.3 | | B |
| Combination Procedure: OIL PUMP: Remove & Replace: |
| Front | | 1.1 | 1.1 | B |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| Front | | 0.2 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | 0.3 | C |