LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1992 >> APV >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Distributor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition System: Distributor: Installation

  1. To install, reverse removal procedure. To insure correct timing of distributor, it must be installed with the rotor correctly positioned before distributor was removed.
  2. If engine was cranked after distributor was removed, remove No. 1 spark plug. Place finger over No. 1 cylinder spark plug hole. Crank engine slowly until compression is felt. Align timing mark on pulley to "0" on engine timing indicator. Turn rotor to point to cylinder No. 1 spark plug tower on distributor cap. Complete distributor installation. Start engine and check ignition timing.
scientia non olet · About LEMON Manuals