LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1998 >> Forward Control P12 >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Computer Relearn Procedures) >> Computer Relearn Procedures - Cars >> DEVILLE, ELDORADO & SEVILLE >> Electronically Erasable Programmable Read Only Memory (EEPROM) Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronically Erasable Programmable Read Only Memory (EEPROM) Programming

WARNING: This page does not describe the selected car, but rather 69 other vehicles, including the 1999 Saturn SW2, 1999 Saturn SW1, 1999 Saturn SL2, 1999 Saturn SL1, and 1999 Saturn SL. However, it is still accessible from the selected car via links, so may be relevant.
  1. If Powertrain Control Module (PCM) was replaced, the EEPROM in the PCM must be programmed. If EEPROM is not programmed, a Diagnostic Trouble Code (DTC) will be set in the PCM or PCM may be damaged. Perform EEPROM programming using the Techline equipment manufacturer's instructions and latest software applicable for the vehicle model.
  2. To verify proper EEPROM programming, start engine. If engine starts, go to next step. If engine fails to start, ensure all electrical connections on PCM are okay and all fuses are okay. Check Techline for latest software. Once engine is repaired so it will start, go to next step.
  3. Once EEPROM is programmed, use scan tool to clear DTC P0603 from PCM. Engine oil life interval and transaxle fluid life interval must now be reprogrammed using proper procedure.
scientia non olet · About LEMON Manuals