LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1998 >> Forward Control P12 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Computer Relearn Procedures) >> Computer Relearn Procedures >> "S" & "T" Bodies >> Electronically Erasable Programmable Read Only Memory (EEPROM) Programming (2.2L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronically Erasable Programmable Read Only Memory (EEPROM) Programming (2.2L)

WARNING: This page is about a different variant/trim than selected.
  1. If Powertrain Control Module (PCM) was replaced, the EPROM in the PCM must be programmed. If EEPROM is not programmed, a Diagnostic Trouble Code (DTC) will be set in the PCM. Perform EEPROM programming using the Techline equipment manufacturer's instructions and latest software applicable for the vehicle model.
  2. Once EEPROM is reprogrammed, the Crankshaft Position (CKP) sensor variation learn procedure must be performed using proper procedure.
scientia non olet · About LEMON Manuals