Power Window Switch Continuity Test
Disconnect appropriate power window switch. Using an ohmmeter, check continuity between specified power window switch terminals with power window switch in specified position. See POWER WINDOW SWITCH CONTINUITY table. See Fig 1 . If continuity does not exist at specified terminals, replace appropriate power window switch.
POWER WINDOW SWITCH CONTINUITY
| Application & Position | (1) Terminals No. | |||
|---|---|---|---|---|
| Front Passenger's Switch | ||||
| UP | 1 & 2; 3 & 4 | |||
| OFF | 1 & 2; 3 & 5 | |||
| DOWN | 1 & 4; 3 & 5 | |||
| Rear Switches | ||||
| UP | 1 & 2; 3 & 4 | |||
| OFF | 1 & 2; 3 & 5 | |||
| DOWN | 1 & 4; 3 & 5 | |||
|
||||