Engine Controls - Service & Adjustment Specifications: Capacities

BATTERY SPECIFICATIONS

Series	Cold Crank Amps @ 0°F (-18°C)	Reserve Capacity (Minutes)
J	390	71

FLUID CAPACITY (CRANKCASE) ⁽¹⁾

Application

⁽²⁾ Quantity Qts. (L)

1.6L

4.5 (4.3)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	Includes oil filter capacity.

FLUID CAPACITY (COOLING SYSTEM) ⁽¹⁾

Application

⁽²⁾ Quantity Qts. (L)

Automatic Transmission

5.5 (5.2)

Manual Transmission

5.6 (5.3)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	Includes heater.

FLUID CAPACITY (AUTOMATIC TRANSMISSION) ⁽¹⁾

Application

⁽²⁾ Quantity Qts. (L)

1.6L (3L30)

⁽³⁾

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark with Dexron-III.

⁽²⁾	Drain and refill capacity only. Does not include torque converter, unless specified otherwise.

⁽³⁾	Refill capacity during overhaul is 6.3 qts. (6.0L). Specification for drain and refill capacity during servicing is not available at time of publication.

FLUID CAPACITY (MANUAL TRANSMISSION) ⁽¹⁾

Application

Quantity Qts. (L)

2WD

⁽²⁾ 2.0 (1.9)

4WD

⁽²⁾ 1.6 (1.5)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	75W-85 GL4 Synthetic Lubricant (GM 12346190).