LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1999 >> Forward Control P12 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Computer Relearn Procedures) >> Computer Relearn Procedures - Cars >> CATERA >> Sun Roof Actuator Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sun Roof Actuator Programming

WARNING: This page is about a different variant/trim than selected.
  1. Procedure must be performed when vehicle battery is disconnected. Turn ignition on.
  2. Rotate knob on sun roof control switch to CLOSED position. Sun roof control switch is located on the overhead console near the windshield. After sun roof is fully closed, press and hold knob on sun roof control switch inward for 3 seconds.
  3. Rotate knob on sun roof control switch to the VENT position. After sun roof moves to the vent position, press and hold knob on sun roof control switch inward for 3 seconds.
  4. Rotate knob on sun roof control switch to the OPEN position. After sun roof full opens, press and hold knob on sun roof control switch inward for 3 seconds.
  5. Rotate knob on sun roof control switch to CLOSED position. After sun roof is fully closed, press and hold knob on sun roof control switch inward for 3 seconds.
  6. Sun roof actuator is now programmed. If after programming the sun roof actuator, the sun roof opens after being closed, it may be necessary to reprogram actuator up to 3 more times.