LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1999 >> Forward Control P12 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Computer Relearn Procedures) >> Computer Relearn Procedures - Cars >> SATURN >> Vehicle Driveability Computer Relearn Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Vehicle Driveability Computer Relearn Procedure

WARNING: This page is about a different variant/trim than selected.
  1. If vehicle battery was disconnected or Powertrain Control Module (PCM) was replaced, driving the vehicle will enable the PCM to perform a computer relearn procedure for obtaining proper driveability and engine idle. Until PCM has completed computer relearn procedure, driveability or idle may differ from standard vehicle operation. On A/T models, transaxle shift qualities must be relearned.
  2. On all models, start engine and warm engine to normal operating temperature. Perform 10 sets of upshifts (1-2, 2-3 and 3-4) at about 30 percent throttle.
  3. On DOHC engine, while coasting at 35 MPH, slowly accelerate to 1/2 throttle to achieve a 4-3 downshift. Place gearshift in "D3" while coasting at 20 MPH, slowly accelerate at 3/4 throttle to achieve a 3-2 downshift.
  4. Repeat step 3) 5 times. Vehicle driveability computer relearn procedure is now complete.
  5. On SOHC engine, while coasting at 40 MPH, slowly accelerate to 1/2 throttle to achieve a 4-3 downshift. Place gearshift in "D3" while coasting at 30 MPH, slowly accelerate at 1/2 throttle to achieve a 3-2 downshift.
  6. Repeat step 5) 5 times. Vehicle driveability computer relearn procedure is now complete.