Removal & Installation

WARNING: This page is about the Cavalier Base, 2D Coupe, Automatic, 3T40/MD9, which is a different variant/trim than selected.

TRANS ID - 125, 125C, 3T40

Applies To	Standard Hours	Warranty Hours	Skill Level
	6.8		C
Additional Procedure: TRANSAXLE ASSEMBLY: Removal & Installation:
Where Pwr Strg Interferes add	0.3		C
Combination Procedure: CONVERTER: Drain & Test:
	0.2	0.2	C
Combination Procedure: CONVERTER BUSHING & SEAL: Remove & Replace:
	0.3		B
Combination Procedure: CONVERTER SEAL: Remove & Replace:
	0.2		B
Combination Procedure: FLYWHEEL: Remove & Replace:
	0.2	0.2	C
Combination Procedure: TORQUE CONVERTER: Remove & Replace:
	0.1		C
Combination Procedure: TRANSAXLE ASSEMBLY: Replace:
	1.0		C

Applies To	Standard Hours	Skill Level
2.2L Eng	8.5	C
Combination Procedure: CONVERTER: Drain & Test:
	0.2	C
Combination Procedure: CONVERTER SEAL: Remove & Replace:
	0.2	B
Combination Procedure: FLYWHEEL: Remove & Replace:
	0.2	C
Combination Procedure: TORQUE CONVERTER: Remove & Replace:
	0.1	C
Combination Procedure: TRANSAXLE ASSEMBLY: Replace:
	1.0	C