LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Corvette 2D Convertible, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System With Traction Control System >> Diagnosis & Testing >> Scan Tool Special Functions >> Steering Position Sensor Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Position Sensor Test

  1. This test monitors the analog and digital steering angle position and can only be run after Steering Wheel Position Sensor has been centered. To perform test, go to next step.
  2. Turn ignition off. Install scan tool. Start engine. Drive vehicle in a straight line for 45 seconds at 15 MPH while monitoring Steering Wheel Position Centering Angle on scan tool. When centered, scan tool will indicate YES. Stop vehicle, leave engine running. Using scan tool's Special Functions, select Steering Position Sensor Test.
  3. While monitoring scan tool, turn wheel lock to lock three times. Scan tool reading at centered position should always be near zero for digital and analog display (5 degrees of each other).
scientia non olet · About LEMON Manuals