Individual Power Window Switch

Battery voltage is applied to window switches through power window master switch harness connector C1 terminal "D" (Dark Blue wire) to all switches when ignition switch is in RUN position. Battery voltage is applied to right front window regulator motor through Dark Blue wire when right front window switch is pressed in UP position. Motor is grounded through Brown wire to right front window switch, down contact in right front window switch, to Tan wire and down contact in power window master switch. Motor runs to drive window up. Battery voltage is applied to right front window regulator motor in opposite direction through Tan wire. Motor is grounded through Dark Blue wire, up contact in right front window switch, through Light Blue wire, and up contact in power window master switch. Motor runs to drive window down. Other windows operate similarly from their individual window switches.