Removal & Installation
WARNING: This page is about the Prizm Base, Automatic, A131L/MB3, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 6.0 | C | |||
| Combination Procedure: CLUTCH HOUSING CASE: Replace: | ||||
| 1.9 | 1.9 | B | ||
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: DIFFERENTIAL ASSEMBLY: Overhaul: | ||||
| 2.5 | A | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.6 | C | |||
| Combination Procedure: INPUT SHAFT: Replace: | ||||
| 1.9 | A | |||
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: | ||||
| 1.5 | 1.5 | B | ||
| Combination Procedure: OUTPUT SHAFT: Replace: | ||||
| 2.0 | 2.0 | B | ||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| 0.4 | C | |||
| Combination Procedure: TRANSAXLE CASE: Replace: | ||||
| Half | 1.7 | 1.7 | A | |