LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Prizm LSi, Standard >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Bench Testing >> Brushes & Springs Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brushes & Springs Test

  1. Measure brush length, and replace brushes if less than specification. See STARTER SPECIFICATIONS  . Check brush springs for corrosion or damage. Ensure spring tension is within specification.
  2. Check condition of brush holders, spring clips and insulation between positive and negative holders. Repair or replace as required. Ensure brushes move freely in holders. Before installing new brushes, buff commutator end of brush using emery cloth.
  3. Using ohmmeter, check continuity between positive and negative brush holders. Continuity should not exist. If continuity exists, replace shorted brush holder assembly.
scientia non olet · About LEMON Manuals