Engine Assembly: Remove, Install, and Overhaul

Includes: Replace Rings, Main and Rod Bearings, Camshaft(s), Crankshaft and Timing Components. Remove Cylinder ridge, burnish Cylinders, grind Valves and clean and test or replace Lifters. Includes (where applicable): Adjust Valves. DOES NOT include Pin fit or rebore and align Rods. See machine operations.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
C1500,K1500, w/o Secondary Air Injection,w/Air Cond	Includes: Recover, Evacuate and Recharge Air Conditioning System.	33.4		A
C1500,K1500, w/o Secondary Air Injection,w/o Air Cond		31.6		A
C1500,K1500, w/Secondary Air Injection,w/Air Cond	Includes: Recover, Evacuate and Recharge Air Conditioning System.	34.9		A
C1500,K1500, w/Secondary Air Injection,w/o Air Cond		33.1		A
Additional Procedure: ENGINE ASSEMBLY: Remove, Install, and Overhaul:
w/Auxiliary Trans Cooler add		0.4		A
w/Skid Plate add		0.3		A
Where Eng Oil Cooler interferes add		0.4		A
Combination Procedure: CAMSHAFT BEARING: Remove & Replace: NOTE: This operation applies to full circle, resistance fit bearings only. For split cap type bearings use Camshaft - R&R.
Each		0.3		A
Combination Procedure: OIL PUMP: Overhaul:
		0.6		B
Combination Procedure: VALVE GUIDE: Remove & Replace:
Each		0.2		A