Wiper Motor Assembly: Installation
WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
- Install the water shield and shaft seal onto the wiper motor.
- Position the wiper motor to the wiper drive system module.
- Install the wiper motor screws. Tighten the screws to 62 INCH lbs. (7 N.m).
- Install the wiper drive system module.
- Install the wiper motor crank arm.
- Install the air inlet grille panel.
- Install air inlet screen assembly. Install wiper arm assemblies. See WIPER ARMS . Check wipers for proper operation.