Enter Feature Customization Mode

Turn ignition switch to LOCK position. Remove BCM PRGRM (10-amp) fuse from Instrument Panel (I/P) fuse block. Turn ignition switch to ACC position. BCM first identifies what type of BCM is installed on vehicle by flashing fasten seat belts warning indicator and sounding chime 2, 3 or 4 times. Ensure BCM type currently installed is correct for equipment and features of vehicle. See BCM TYPE VERIFICATION  . After BCM type is identified, BCM will enter into feature customization mode. Feature customization settings can now be programmed. See AUTOMATIC DOOR LOCK MODES LOCKING CONTROL MODES  and INTERIOR LIGHTING MODES  .