LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Venture Plus >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Keyless Entry Systems >> Programming >> Remote Unlock Control Customization
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Unlock Control Customization

  1. If ignition is turned off or driver's door is opened while Body Control Module (BCM) is in any customization mode, customization procedure will end and BCM will remain in most recent mode.
  2. Remove BCM PRGRM fuse located in instrument panel fuse block. Close all vehicle doors and liftgate. Turn ignition switch to ACC position. Seat belt warning light flashes and chime sounds 1-4 times to indicate BCM is in feature customization mode.
  3. Press transmitter UNLOCK button. Seat belt warning light will flash and chime will sound 1-2 times to indicate which remote unlock control mode BCM is in. Each time transmitter UNLOCK button is pressed, mode number will advance. After mode 2, mode 1 will repeat.
  4. See REMOTE UNLOCK CONTROL CUSTOMIZATION  table. To exit and save current customization, turn ignition off and replace BCM PRGRM fuse.
REMOTE UNLOCK CONTROL CUSTOMIZATION

Mode Remote Unlock Control
1 All Doors & Liftgate Unlock
2 (1) Driver Door Unlock Only
(2) All Doors & Liftgate Unlock
(1) First press of transmitter UNLOCK button.
(2) Second press of transmitter UNLOCK button.
scientia non olet · About LEMON Manuals