Automatic Door Lock Modes
- Turn Instrument Panel (I/P) dimmer switch off. Turn ignition switch to LOCK position. Remove BCM PRGRM (10-amp) fuse. Turn ignition switch to ACC position. BCM will sound chime a number of times equivalent to BCM type installed on vehicle (2, 3, or 4 chimes). After BCM type is identified, BCM enters into feature customization mode.
- To change automatic door lock mode, press and release power door lock switch to LOCK position. BCM will sound chime a number of times equivalent to current locking control mode (1-4). Press and release power door lock switch to LOCK position until desired locking control mode setting, go to next step. Chime indicator sequence will repeat after chime sounds for locking control mode 4.
- To exit and save current feature customization mode settings, turn ignition switch to LOCK position. Reinstall BCM PRGRM (10-amp) fuse. If unable to change locking control modes, go to AUTOMATIC DOOR LOCKS INOPERATIVE in POWER DOOR LOCKS - MONTANA, SILHOUETTE & VENTURE
article.AUTOMATIC DOOR LOCK OPERATION MODES
Mode Shift Out Of Park Lock Ignition Off Unlock Shift Into Park Unlock 1 Disabled Disabled Disabled 2 Enabled Disabled Disabled 3 Enabled Enabled Disabled 4 Enabled Disabled Enabled